Fly Eagle Jet Model Factory

Thank you for purchasing the model of FLY EAGLE JET MODEL. All of our products are high-performance miniature models. They can be flown with high speed and damage depending on how you control them and how you assemble your model. Any possibility might happen out of sudden or lose control on some specific circumstance. We strongly recommend that you should inspect all parts before and after you assemble your model. Make 100% sure your model can be flown the way you fly with. The manufacturer or distributors and dealers have no ability and liability to identify how you assemble and fly your model with high security. If you find something need to be repaired or for replacement, you should contact with your local dealer or distributor how to resolve your issue. You also can contact with the manufacturer to get a solution. All items for replacement should be un-used. After used, we do not accept replacement. We hope everyone can enjoy with your model and have a good fly without any unpleasing accident.

Some of our models have movable function on the fins. We strongly recommend that you better glue your fin to fuselage tightly before you fly your model with high speed. When first maiden flight, do not install full ordnance set before you used to it and know how to fly it well. This is for safety consideration.

Warning: This is not a toy. If not properly controlled, it can cause injury and property damage.

Important experience:

If you experienced a WET START or your engine doesn’t combust completely and left some fuel inside the pipe to burn the pipe with high temperature degree, this will undermine or degrade the quality of stainless steel pipe and collapse inside the pipe, then you have to replace the pipe immediately and you might send your engine for inspection. If you find any issue on it or question, you should contact the dealer or manufacture for more information or for replacement

Photo 1: The customer changed a new pipe after wet start. He still has his F15E with him and has flown well.

Photo 2: The customer did not change pipe and keep flying after burning the pipe seriously. He lost his model completely.

Photo 1 Photo 2

There are so many different brands of engines from worldwide and there are so many different sizes of turbines. When you place a model order, you can choose what kind of thickness of pipe is good for your engines. We have different thickness of pipe for different engine which you can choose as below:
1. Inner pipe with 0.12mm and outer pipe with 0.1mm
2. Inner pipe with 0.15mm and outer pipe with 0.1mm
3. Inner pipe with 0.20mm and outer pipe with 0.1mm

When customers receive the pipe, you should inspect it before using. After you use, we do not accept exchange, replacement or responsibility for any lost or damage. The dealer or manufacture can not identify how customers’ usage and installation. For example, some people might adjust their engines more RPM to get more power. It might cause fuel combust not completely and left fuel inside the pipe to reduce the quality of steel and damage the pipe.
Normally when you order a model, the pipe will come with the model. If you feel it is not good for your usage, you can order a model without a pipe or not use it.

PS: The thicker pipe will be heavier and you might need to add more weight on the nose area.

Servo boxes mounted instruction:

Flyeaglejet ARF F104 1:6 Instruction Manuals